MSN EMAIL +86-373-3020456
Mobil:86 15560181018
Intelligent Battery Charger with motorized transfer cart
Add Time£º[2011-08-07 08:12:18]   Hits£º6250    Print  Close

Intelligent Battery Charger with motorized transfer cart

"Motorized transfer cart" recommend intelligent battery charger to apply for KPX motorized transfer cart.
A "smart charger" should not be confused with a "smart battery". A smart battery is generally defined as one containing some sort of electronic device or "chip" that can communicate with a smart charger about battery characteristics and condition. A smart battery generally requires a smart charger it can communicate with (see Smart Battery Data). A smart charger is defined as a charger that can respond to the condition of a battery, and modify its charging actions accordingly. Some smart chargers are designed to charge "smart" batteries. Some smart chargers are designed to charge "dumb" batteries, which lack any internal electronic circuitry. The term "smart battery charger" is thoroughly ambiguous, since it is not clear whether the adjective "smart" refers to the battery or only to the charger.

The output current of a smart charger depends upon the battery's state. An intelligent charger may monitor the battery's voltage, temperature and/or time under charge to determine the optimum charge current at that instant. Charging is terminated when a combination of the voltage, temperature and/or time indicates that the battery is fully charged.

For Ni-Cd and NiMH batteries, the voltage across the battery increases slowly during the charging process, until the battery is fully charged. After that, the voltage decreases, which indicates to an intelligent charger that the battery is fully charged. Such chargers are often labeled as a ΔV, "delta-V," or sometimes "delta peak", charger, indicating that they monitor the voltage change.

The problem is, the magnitude of "delta-V" can become very small or even non-existent if (very) high[quantify] capacity rechargeable batteries are recharged.[citation needed] This can cause even an intelligent battery charger to not sense that the batteries are actually already fully charged, and continue charging. Overcharging of the batteries will result in some cases. However, many so called intelligent chargers employ a combination of cut off systems, which should prevent overcharging in the vast majority of cases.

A typical intelligent charger fast-charges a battery up to about 85% of its maximum capacity in less than an hour, then switches to trickle charging, which takes several hours to top off the battery to its full capacity.

Conclution: intelligent battery charger is the highest efficient
to motorized transfer trolley powered with batteries, as well as the most economical device.


By Bill Wu  keyword: battery charger, motorized transfer cart  contact:  /

Introduction | Enterprise culture | Leadership speech | Honors | Human resources | Events | Advice | Common Problem