MSN EMAIL +86-373-3020456
Phone:+86-373-3020456
Mobil:86 15560181018
Fax:+86-0373-7720077
Msn:transfercar@msn.com
Email: sale@transfer-cart.com
What are the driving mechanisms and principles of coils and die industrial use motorized rail die transfer carts?
Add Time£º[2018-01-27 11:40:13]   Hits£º66    Print  Close

 1. Total placement and frame.

 
Coils and die industrial use motorized rail die transfer carts is mainly composed of frame system, transmission equipment (active wheel pair), passive wheel pair, electric control, etc.The frame is a frame structure welded with four longitudinal beams and several beams and paving plates. The large channel steel is usually used as the longitudinal and beam of the frame, which is carried by eight, and the frame is evenly distributed.The wheel alignment of the bearing pedestal of the pole is connected with the frame of the frame, which reduces the height of the mesa.A link hook is set before and after the coils and die industrial use motorized rail die transfer carts. If necessary, it can pull other flat cars or be pulled.The lifting holes are arranged on both sides of the flat car for lifting.BJT flat car is powered by cable drum, BXC flat car battery power supply, BDG flat car is supplied by low-voltage track, the axle adopts insulation measures, and the electric conduction equipment is added, and the car is equipped with booster transformer.The electrical energy of the supply is controlled by the electrical system to move or back up. The operation method is to use the hand-held button box to walk with the car.
 
2. The wheels
 
Between the wheel and axle is equipped with the insulation sleeve and list of the insulation pads, insulation sleeve made from high mechanical properties of the insulation material of nylon, the wheel after insulation makes KPD series coils and die industrial use motorized rail die transfer carts can use two orbit as two conductor rail.The axle material is 45# steel, the wheel material is made of no.55 high quality cast steel, the wheel surface is hardened, and the bearing is double row radial spherical roller bearing, which can automatically compensate the deformation deviation of the frame.
Wheel through the pole of bearing installed under the frame beams, each side with four bolts, this structure is useful to reduce the mesa height, lateral stability, bearing capacity, the frame stress.
Keyword:coils and die industrial use motorized rail die transfer carts
Introduction | Enterprise culture | Leadership speech | Honors | Human resources | Events | Advice | Common Problem