XINXIANG HUNDRED PERCENT ELECTRICAL AND MECHANICAL CO., LTD
( HPC )
HPC MANUAL Transfer Cart With Hydraulic Scissors Lift
TABLE OF CONTENT
Product Information ........................................................................................................... 2
Responsibilities of Owners ..............................................................................................3
Safety Instructions ............................................................................................................. 4
Warning Labels .................................................................................................................. 5
Installation Instructions ..................................................................................................... 6
Electrical Installation ......................................................................................................... 7
Load Capacity ..................................................................................................................... 8
Daily Operator Checks ...................................................................................................... 9
Operator Instructions ....................................................................................................... 10
Maintenance Instructions ................................................................................................ 11
Maintenance Instructions ................................................................................................ 12
Adjusting hydraulic scissor lifts ..................................................................................... 13
Lubricating hydraulic scissor lifts .................................................................................. 14
Hydraulic fluid recommendations ..................................................................................14
Troubleshooting guide .....................................................................................................15
Warranty...............................................................................................................................16
Electrical Schematic .........................................................................................................17
Replacement parts drawings .........................................................................................18
PRODUCT INFORMATION
This Service and Replacement Parts Manual applies to the following HPC machinery:
Product Information£º Transfer Car with Hydraulic Scissors Lift
Model Number£º
Rated Load Capacity£º
Serial Number£º
Registered User£º
Date Shipped£º
For warranty information, service, and replacement parts information; please call your local dealer or HPC at 0373 7720456. Please have the above Product Information available when calling.
This manual should be kept with the machine at all times. In the event the machine is re-sold,or transferred to another facility, please contact the factory so that we can update our service and warranty records.t
Serial #:
Responsibilities Of Users / Owners
The following are the Responsibilities of owners and users of this equipment:
1. Deflection. It is the responsibility of the user/purchaser to advise the manufacturer
in those cases where deflection may be critical to the operation.
2. Inspection and Maintenance. The lift shall be inspected and maintained in proper
working order in accordance with the manufacturer's operating/maintenance
manual and safe operating practices.
3. Removal from Service. Any lift not in safe operating condition shall be removed
from service until it is repaired to the original manufacturer's standards.
4. Repairs. All repairs shall be made by authorized personnel in conformance to the
manufacturer's instructions.
5. Operators. Only trained and authorized personnel shall be permitted to operate
the lift. A copy of the service manual should be kept with the lift at all times so that it
may be referred to by all operators.
A. Before Operation. Before using the lift, the operator shall have:
• Read and/or have explained and understood, the manufacturer's operating
instructions and safety rules, or be trained by a qualified person.
• Inspected the lift for proper operation and condition. Any suspect item shall
be carefully examined and a determination made by a qualified person as to
whether it constitutes a safety hazard. All unsafe items shall be corrected
before further use of the lift.
B. During Operation. The lift shall be used only in accordance with its intended
use and within the manufacturer's limitations and safety rules.
(1) Do not overload the lift.
(2) Ensure that all safety devices are operational and in place.
6. Safety Warning Labels. It is the responsibility of the owner to maintain all safety
warning labels in a clear, readable condition in the same positions as originally
applied by the manufacturer. Contact the supplier for additional safety labels and
information on their correct application and location.
7. Modifications and Alterations. Modifications or alterations of industrial scissor
lifts shall be made only with the written permission of the original manufacturer.
These changes shall be in conformance with all applicable provisions of the
standard covering the safety requirements for Industrial scissors lifts and shall be at
least as safe as the equipment was before modification. These changes shall also
satisfy all safety recommendations of the original equipment manufacturer for the
particular application of the lift.
Safety Instruction
Safety Instructions for Hydraulic Scissor Lifts:
1. Do not operate this equipment unless you have been trained and authorized to do so.
2. Know and follow all of these warnings and instructions as well as those contained
in the lift owner's manual.
3. Prior to using lift, inspect it for proper operation and condition.
4. Prior to using lift, inspect all safety devices to be certain they are in place and functioning properly.
5. Do not exceed the lift's capacity as stated on the serial number plate.
6. Center loads on the lift platform.
7. If load is mobile, secure load in a fixed position before operating lift.
8. Keep the entire load within the perimeter of the platform while lift is in motion.

9. Ensure that people and objects are clear of the areas beneath the platform and immediately surrounding the
perimeter of the lift while lift is in motion.
10. Do not work under the lift without the maintenance device(s) in position. See
owner's Manual for how to ensure the safe use of the maintenance device.
Warning Labels
All safety decals must be kept clean and legible and replaced when necessary. Call or
write to the factory to obtain free replacement decals.

NOTE: High voltage warnings will appear on covers of electrical enclosures and junction
boxes when motor controls are furnished.
( to be continued )
|